GB/T 15887-1995 SMC type RF coaxial connector
time:
2024-08-08 13:30:00
- GB/T 15887-1995
- in force
Standard ID:
GB/T 15887-1995
Standard Name:
SMC type RF coaxial connector
Chinese Name:
SMC型射频同轴连接器
Standard category:
National Standard (GB)
-
Date of Release:
1995-01-02 -
Date of Implementation:
1996-08-01
Standard ICS number:
Telecommunications, audio and video technology>>Parts and accessories for telecommunications equipment>>33.120.30 Radio frequency connectorsChina Standard Classification Number:
Electronic Components & Information Technology >> Electronic Components >> L23 Connector
publishing house:
China Standards PressISBN:
155066.1-13145Publication date:
2004-08-26
Release date:
1995-12-22Review date:
2004-10-14Drafting Organization:
Jingdezhen Radio Components Factory No.5Focal point Organization:
National Technical Committee for Standardization of High Frequency Cables and Connectors for Electronic EquipmentPublishing Department:
State Bureau of Technical SupervisionCompetent Authority:
Ministry of Information Industry (Electronics)
Description (Translated English) / downloadSkip to download
Summary:
This standard specifies the detailed requirements for SMC type RF coaxial connectors. This standard is used together with GB 11313-89 "General Specification for RF Coaxial Connectors". This standard applies to SMC type RF coaxial connectors with threaded connection mechanism for connecting RF coaxial cables in the RF circuit of low-power radio equipment and electronic instruments, and its characteristic impedance is 50Ω. GB/T 15887-1995 SMC type RF coaxial connector GB/T15887-1995 Standard download decompression password: www.bzxz.net
- Recommended standards
- GB/T 16083-1995 Determination of carbon tetrachloride in workplace air by solvent desorption gas chromatography
- GB/T 3914-1983 General rules for anodic stripping voltammetry with chemical reagents
- MT/T 748-1997 Determination of cold pressing strength of industrial coal briquettes
- JB/T 9102.1-1999 Metallic flat packing for reciprocating piston compressors Part 1: Three-bevel seal ring
- JB/T 7070.2-2002 Test Guidelines for Voltage Regulators Part 2: Test Guidelines for Induction Voltage Regulators and Induction Automatic Voltage Regulators
- GB/T 3744.2-1983 Compression-type tapered thread right angle tee fitting
- JB/T 8014.3-1999 Interchangeable locating pins for machine tool fixture parts and components
- JB/T 6279.2-1992 Technical requirements for disc harrows
- GB 50050-1995 Design specification for industrial circulating cooling water treatment
- JB/T 5948-1991 Technical specifications for caliper disc brakes for engineering machinery
- JG/T 5103-1998 Mast-type aerial work platform
- HG/T 2254-1991 Photographic Chemicals Coupler COM-1
- JB/T 5866-2004 General technical requirements for wide speed adjustable permanent magnet DC servo motors
- GB/T 11699-2003 Propeller shaft ends and hubs with a taper of 1:10 for inboard boats
- JB/T 2409-1999 Basic parameters and dimensions of screw compressor rotors and synchronous gears
Please remember: "bzxz.net" is the combination of the first letters of the Chinese pinyin of the four Chinese characters "standard download" and the international top-level domain name ".net". ©2024 Standard download websitewww.bzxz.net Mail：bzxznet@163.com