
GB 12623-1990 General technical requirements for protective shoes
time:
2024-08-09 00:13:42
- GB 12623-1990
- Abolished
Standard ID:
GB 12623-1990
Standard Name:
General technical requirements for protective shoes
Chinese Name:
防护鞋通用技术条件
Standard category:
National Standard (GB)
-
Date of Release:
1990-01-02 -
Date of Implementation:
1991-10-01 -
Date of Expiration:
2005-10-14
Standard ICS number:
Environmental protection, health care and safety>>Protective equipment>>13.340.10 Protective clothingChina Standard Classification Number:
Medicine, Health, Labor Protection>>Labor Safety Technology>>C73 Labor Protection Products
Review date:
2004-10-14Drafting Organization:
Jilin Labor Protection Research InstituteFocal point Organization:
National Technical Committee for Standardization of Personal Protective EquipmentPublishing Department:
State Bureau of Technical SupervisionCompetent Authority:
State Administration of Work Safety

Skip to download
Summary:
This standard specifies the classification, technical requirements, test methods and markings of protective shoes. This standard applies to protective shoes worn during labor operations. GB 12623-1990 General Technical Requirements for Protective Shoes GB12623-1990 Standard download decompression password: www.bzxz.net
- Recommended standards
- JB/T 58651.12-1999 Fastener product quality classification retaining ring
- QB/T 1803-1993 General test methods for industrial enzyme preparations
- QB/T 2221-1996 Canned Eight Treasure Porridge
- JB/T 3625-1999 Technical requirements for rust-proof packaging of modular fixture components
- HG 2942-1998 Cycle Inner Tube Valve
- GB/T 2900.9-1994 Electrical terminology spark plug
- HY/T 058-2010 Operational norms for archives on the oceanographic survey observation and monitoring
- GB/T 11606.6-1989 Environmental test methods for analytical instruments - Constant humidity test
- JG/T 73-1999 Stainless steel building profiles
- GB/T 15072.14-1994 Chemical analysis methods for precious metals and their alloys - Determination of aluminum content in silver alloys
- JB/T 3073.3-1991 Technical specifications for die-forged moving and stationary blades and hot-rolled stationary blade blanks for steam turbines Hot-rolled stationary blade blanks
- GB/T 4459.6-1996 Mechanical drawing - Dynamic seal ring representation method
- GB/T 2900.39-1994 Electrical terminology - Special equipment for motors and transformers
- GB/T 9336-2001 Direct Black L-3BG
- GB/T 8762.8-2000 Chemical analysis method for europium oxide - Determination of lanthanum oxide, cerium oxide, praseodymium oxide, neodymium oxide, samarium oxide, gadolinium oxide, terbium oxide, dysprosium oxide, holmium oxide, erbium oxide, thulium oxide, ytterbium oxide, lutetium oxide and tantalum oxide in europium oxide by inductively coupled plasma atomic emission spectrometry
Please remember: "bzxz.net" is the combination of the first letters of the Chinese pinyin of the four Chinese characters "standard download" and the international top-level domain name ".net". ©2024 Standard download websitewww.bzxz.net Mail:[email protected]