Please remember: "bzxz.net" is the combination of the first letters of the Chinese pinyin of the four Chinese characters "standard download" and the international top-level domain name ".net". ©2024 Standard download websitewww.bzxz.net Mail：bzxznet@163.com
-
JB/T 7977-1999 Cast iron ruler
-
-
JB/T 7977-1999 This standard is a revision of JB/T 7977-95 "Cast Iron Ruler". During the revision, editorial changes were made acc
2024-10-03 category：Machinery Industry Standard (JB)+ View
-
-
JB/T 7975-1999 Rock Slab
-
-
JB/T 7975-1999 JB/T 7975-1999 Rock Slab JB/T7975-1999 Standard download decompression password: www.bzxz.net
2024-10-03 category：Machinery Industry Standard (JB)+ View
-
-
JB/T 7974-1999 Cast iron plate
-
-
JB/T 7974-1999 This standard is a revision of JB/T 7974-95 "Cast Iron Plate". During the revision, editorial modifications were ma
2024-10-03 category：Machinery Industry Standard (JB)+ View
-
-
JB/T 7973-1999 Sine Rule
-
-
JB/T 7973-1999 This standard is a revision of JB/T 7973-95 "Sine Gauge". During the revision, editorial changes were made accordin
2024-10-03 category：Machinery Industry Standard (JB)+ View
-
-
JB/T 7972-1999 Carbide helical tooth taper shank end mill
-
-
JB/T 7972-1999 This standard is a revision of JB/T 7972-95 "Carbide Helical Taper Shank End Mill". During the revision, the perfor
2024-10-03 category：Machinery Industry Standard (JB)+ View
-
-
JB/T 7971-1999 Carbide helical tooth straight shank end mill
-
-
JB/T 7971-1999 This standard is a revision of JB/T 7971-95 "Carbide Helical Tooth Straight Shank End Mill". During the revision, t
2024-10-03 category：Machinery Industry Standard (JB)+ View
-
-
JB/T 7970.2-1999 Disc gear milling cutters Part 2: Technical requirements
-
-
JB/T 7970.2-1999 This standard is a revision of JB/T 7970.2-95 "Technical requirements for disc gear milling cutters". During the
2024-10-03 category：Machinery Industry Standard (JB)+ View
-
-
JB/T 7970.1-1999 Disc gear milling cutters Part 1: Basic types and dimensions
-
-
JB/T 7970.1-1999 JB/T 7970.1-1999 Disc gear milling cutters Part 1: Basic types and dimensions JB/T7970.1-1999 Standard download d
2024-10-03 category：Machinery Industry Standard (JB)+ View
-
Hot Standard
More+
- JB/T 5815-1991 JB/T 5815-1991 Types and dimensions of wire and cable drawing equipment 09-26
- GB/T 8220.11-1998 GB/T 8220.11-1998 Chemical analysis of bismuth - Determination of mercury content by cold vapor atomic absorption spectrometry 12-20
- GB 151-1999 GB 151-1999 Shell and tube heat exchanger 11-22
- SJ 20699-1998 SJ 20699-1998 General specification for medium wave navigation vehicles 04-09
- GB/T 7286.1-1987 Test Method for total normal emittance of metals and nonmetallic materials 08-10
- JB/T 8355-1996 JB/T 8355-1996 General technical requirements for shot peening equipment 10-04
- JB 5317.3-1991 JB 5317.3-1991 Conical rotor motor for electric chain hoist 01-01
- GB 15955-1995 GB 15955-1995 Gibberellic acid technical 03-30
- GB/T 4956-2003 Oon-magnetic coatings on magnetic substrates?Measurement of coating thickness?Magnetic method 08-06
- GB 50098-1998 GB 50098-1998 Code for fire protection design of civil air defense projects 03-15
- FZ/T 12010-2001 FZ/T 12010-2001 Cotton-spandex core-spun natural yarn 01-29
- GA 381.2-2002 GA 381.2-2002 Common Data Interchange Format Part 2: Interchange Layer Interface Format 01-09
- GB/T 5188-1985 GB/T 5188-1985 Brass foil 04-18
- SJ 20018-1992 Detail specification for disk-seal tube of Type FM24 08-20
- SJ/T 11050-1996 prepreg for use as bonding sheet material in the fabrication of multilayer printed boards 08-13
- GB 6462-1986 Metallic and oxide coatings; Measurement of coating thickness; Microscopical method 08-10
- GB/T 20001.2-2001 Rules for drafting STANDARDs--Part 2:Symbol 08-05
- JB/T 9272-1999 JB/T 9272-1999 Ammonia pressure gauge 10-29